Home / News / Executive Standard Of Hex Rivet Nut

Executive Standard Of Hex Rivet Nut

Like one of the blind rivet nuts, hex rivet nut is not widely used in all walks of life. However, the production of hex rivet nut has strict regulations in terms of product quality and materials. Therefore, it is necessary to strictly follow the standards in the production process.

The material of hex rivet nut is also divided into galvanized iron, 304 stainless steel, and 316 stainless steel. The specifications supplied are M3-M12. The hex rivet nut is divided into flat head hex rivet nut female and small head hex rivet nut, which are installed in the hexagon bottom hole. It has a hexagonal shape, which can completely prevent slippage and can withstand greater torque. After testing, even if the thread is damaged, the hex rivet nut can still be firmly riveted on the thin plate. Its installation method is the same as that of ordinary round rivet nuts. The installation method is exactly the same, but when punching the bottom hole, it must be punched into a corresponding hexagonal hole. The national standard number is GB/T17880.5.

Of course, if the customer needs a rivet nut, it can be based on its specification, type, material, electroplating, and public range. Please order the size and length. Some are of national standard specifications. You only need a national standard number to know. If you are electroplating, you can electroplate different colors. Of course, half hex rivet nut is also possible, but it must be implemented in accordance with national standards.

0